Zwickau, Horch and Audi
Zwickau was building cars before the Trabant. August Horch had his company registered there in 1904, had to leave it in 1909 and founded a second one within sight of it, called Audi from 1910. In 1932 both became part of Auto Union. After 1945 the plants were dismantled and, after the 1946 referendum in Saxony, expropriated. In 1955 the Audi plant became VEB Automobilwerk Zwickau (AWZ; VEB stands for state-owned enterprise), and in 1957 the Horch plant became VEB Sachsenring Kraftfahrzeug- und Motorenwerke. The name came from the Sachsenring race track near Hohenstein-Ernstthal.
On May 1, 1958, the Council of Ministers, the GDR government, merged both companies into VEB Sachsenring Automobilwerke Zwickau to have enough capacity for the new small car. From then on the Trabant carried the curved S of Sachsenring. Plant 1, the former Horch plant, made the floor pan, steel frame and gearbox; the former Audi plant produced the plastic parts and handled final assembly. The engine came from the Barkas plant in Karl-Marx-Stadt (now Chemnitz).
A car made of Duroplast
The Council of Ministers set the targets: at most 600 kilograms, four seats, fuel consumption under six liters, a price of around 4,000 marks (East German marks) and 12,000 units a year. Because deep-drawing sheet steel was scarce and expensive, the outer skin was to be plastic. The material was ready in October 1953: Duroplast, made of cotton fibers and phenolic resin pressed in layers under heat and high pressure, about 46 percent cotton and 52 percent resin. Up to ten of these panels were glued onto the steel frame. The plant gained its first experience with it on the predecessor P 70, built from 1955 to 1959.
P 50 and P 60
The pilot series of 50 cars left the line on November 7, 1957, and series production started in July 1958. The P 50 had an air-cooled two-cylinder two-stroke engine of 500 cc and 18 hp. By 1962, 131,450 were built, including 11,643 station wagons. In 1962 came the Trabant 600 (P 60) with 594.5 cc and 23 hp, built until 1965, 106,628 in total.
Trabant 601
The 601 was presented in 1963, and series production began in June 1964. Floor pan and engine came from the P 60; the body was new and more angular, with a hint of tail fins. From 1969 the engine produced 26 hp, and the top speed was just over 100 km/h. Besides the sedan there was the Universal station wagon, the Kübelwagen (an open utility car) and, with the Hycomat, an automatic clutch, also for people with disabilities.
As early as 1964 the trade journal Kraftfahrzeugtechnik saw the limits of the compromise body. Successors such as Type 603 and Type 610 never got beyond prototypes. So the 601 remained almost unchanged through the 1970s and 1980s; only output rose, to 145,576 a year by 1987. In 1978 it cost 7,850 marks, in 1985 8,500 marks. In 1988 the waiting time was about 15 years. The 601 was discontinued in July 1990, after 2,818,547 units.
Trabant 1.1 and the end
In 1984 the GDR signed a license agreement with Volkswagen. The Trabant 1.1 got a 1,043 cc four-stroke engine, a steel hood and improved suspension. Series production began in May 1990, shortly before the currency union that brought in the Deutsche Mark. After that, the new cars stood unsold in storage lots. On April 30, 1991, the last Trabant, number 3,096,099, left the line and went to a museum.
The Trabant today
In January 2024, 40,826 cars made by Sachsenring were registered in Germany, and the number has been rising again since 2010. In the former Audi plant in Zwickau, the August Horch Museum shows the full history of car building in Zwickau. According to the dpa news agency, the Internationales Trabant-Register (International Trabant Register) in Zwickau holds trademark rights to the Trabant lettering and the curved S.
Timeline
- 1904August Horch & Cie. registered in Zwickau.
- 1910August Horch’s second company is named Audi.
- 1932Horch and Audi become part of Auto Union.
- 1946Referendum in Saxony; the Zwickau plants are expropriated.
- 1953Development of Duroplast is complete.
- 1955AWZ P 70 with plastic body.
- 1957Pilot series of the P 50 from November 7.
- 1958VEB Sachsenring Automobilwerke Zwickau on May 1; series production begins in July.
- 1962Trabant 600 with a larger engine.
- 1964Series production of the Trabant 601 begins in June.
- 1969601 with 26 hp.
- 1973One-millionth Trabant on November 22.
- 1984License agreement with Volkswagen.
- 1990601 discontinued in July; Trabant 1.1 in series production since May.
- 1991Last Trabant on April 30.
Models
| Model | Type | Built | Units |
|---|---|---|---|
| AWZ P 70 | predecessor with Duroplast parts | 1955–1959 | 36,151 |
| P 50 (Trabant 500) | sedan, station wagon | 1957–1962 | 131,450 |
| P 60 (Trabant 600) | sedan, station wagon | 1962–1965 | 106,628 |
| P 601 | sedan, Universal, Kübel | 1964–1990 | 2,818,547 |
| Trabant 1.1 | sedan, Universal, VW engine | 1990–1991 | 39,474 |
Quick answers
- How many Trabants were built?
- 3,096,099 from November 1957 to April 1991, 2,818,547 of them of the 601 type.
- What is the Trabant body made of?
- Duroplast, a plastic made of cotton fibers and phenolic resin, on a steel frame.
- How long did you have to wait for a Trabant?
- In 1988, about 15 years for a new Trabant 601.
- When did the last Trabant leave the line?
- On April 30, 1991, in Zwickau. It carries the number 3,096,099 and is in a museum.
The brands mentioned belong to their current owners. This page is editorial, covers their history and has no connection with the owners. We do not show brand logos.